
|
The Mopar House is not selling nor is it responsible for these parts or products. We urge you to be careful of buying any items over the Internet. We also want to tell people it is a Federal offence to defraud people over the Internet. There have been a few scams reported back to me and the ads were deleted immediately. If you are going to buy any merchandise I strongly urge you to make sure you know whom you are buying parts from. You can do searches on the Internet, or in phone books. After you speak to a person on a phone its good practice to have him photocopy his drivers license and have him fax it to you. Usually people who are selling items want guaranteed payments such as money orders. Thats fine but you should also have a guaranteed shipment. So they can go through a little extra work to prove who they are. Whatever practice you use make sure you check out who you are buying stuff from. Get work numbers home numbers fax numbers and contact them from all ways to know they are ligitement. This is simply a way for people to locate the parts etc, that they need. These ads are free to use for as long as you would like. We would appreciate it if you would contact us when these ads get resolved so we can eliminate them. |
|
This section is for people trying to locate parts | |
DESCRIPTION |
CONTACT |
WANTED:Needing instrument cluster(speedometer head) for 1991 Dodge pickup 250 diesel.8/8/08 | Steve Pack, srpisme@go.com |
WANTED:64 Valiant wagon tail light 1 or 2 if u have them. 909-466-5616.8/26/08 | Scott Miller, swiftysign@aol.com |
WANTED:4bbl cast iron intake for a 1972 360.8/26/08 | Jim, jlamaster@suddenlink.net |
WANTED:Drivers side armrest (black) and set of woodgrain inlays for all 4 doors, in good shape, for 1966 Chrysler New Yorker. Please email pics if available..8/26/08 | Jeff, jhart21@hotmail.com |
WANTED:3 switch bezel for 70- 74 ebody dash.8/26/08 | Brunkles, brunkles@gimail.af.mil |
WANTED:1975 Road Runner, or '75-'76 "small" 2 dr Fury Wanted Must be in good condition, or restored. Call Dave @ 410-937-6866. 8/26/08 | Dave Bielecki, ddkdbielecki@aol.com |
WANTED:1966 plymouth sport fury front fender chrome wheel openings must be very nice. 8/26/08 | Don, dmdudgeon@msn.com |
WANTED:I need the plastic bumper filler for the hood, 1973 Dodge Charger rally. 8/26/08 | Mike Hart, mikart@murlin.com |
WANTED:Passenger door glass for 2-dr 1973 Plymouth Scamp, must be good condition. Will pay top $$.8/26/08 | Yekiam Kwan, yesman693@embarqmail.com |
WANTED:1971 GTX Dash emblem and the rocker moldings. thanks for all the work you put into this site.8/26/08 | David Fetty, Buckneccid@Yahoo.com |
WANTED:In the market for front bench seat for a 1967 Plymouth Belvedere or any 66- 67 B-body bench seat. also interested in front and rear bumpers for 1967 Belvedere II.8/26/08 | Jay Pippin, jayfp3@aol.com |
WANTED:I am looking for a 4bbl non-egr intake for a 1972 Dodge 360. Cast or aluminum does not matter.10/16/08 | Jim, jlamaster@suddenlink.net |
WANTED:1966 Chrysler 300 taillight assembly lt/rt side, also other trim. Please contact through e-mail for phone #.10/16/08 | Mike, mikesswingle@yahoo.com |
WANTED:I need a hood for 1969 Dodge Coronet converting to hinged hood from fiberglass pinned.10/16/08 | Derric Scott, miscia222@yahoo.com |
WANTED:I need chrome,steel, wheel well trim for my 89 Dodge Dakota.10/16/08 | Steve, Warby17@sympatico.ca |
WANTED:Upper controll arms for 69 Dodge Dart.10/16/08 | Don, babyboo_cin@hotmail.com |
WANTED:71 Cuda Front Valance.10/16/08 | Craig, cdc@eganco.com |
WANTED:Looking for N.O.S. Mopar horn buttons, and all exterior emblems, medallions, nameplates, ornaments for 1935 through 1975 for my collection. Extra money paid if with original packaging..10/16/08 | Carmen Valentin, moparpackrat@yahoo.com |
WANTED:Tail light lenses for a 1963 Valiant SAE ST DB 63L.10/16/08 | Dave, nosral@telus.net |
WANTED:Looking for quarter panel trims over the wheel trims for a 1968 plymouth fury 2 door thankyou.10/16/08 | Julio, juniorjulio535@aol.com |
WANTED:Temp. alt. and fuel gauge cluster for a 1966 Plymouth Fury 3 convertable.10/16/08 | Frank Feemster, frankf@embarqmail.com |
WANTED:Looking for a 74 plymouth B body heater control cable.10/16/08 | Don Cameron, cameronsafety@skyrydernet.com |
WANTED:Looking for a 71-74 Dodge Charger bulge power hood. It can be air grabber as well. I live in Wisconsin but can pick up in state border states. Otherwise I will need it shipped Thanks.10/16/08 | Dave, davidd542@sbcglobal.net |
WANTED:Mopar 340 block.10/16/08 | Bill Turner, BLTurner1@aol.com |
WANTED:Looking for a 1965 Dodge Dart Fuel Cap, front and rear seats.10/16/08 | Valarie, valerie_mendoza85@yahoo.com |
WANTED:76-80 Volare or Aspen Outer Rear Wheel Well Housings and Trunk extensions for both PS and DS.10/16/08 | Kent Laabs, soundworkssystems@sbcglobal.net |
WANTED:I'm in need of a 1965 Dodge Coronet 440 tail light. Phone 519-852-2470 or e-mail me.12/20/08 | Doug Anger, jameyanger66@msn.com |
WANTED:oil pump drive gear ....for 57 Plymouth Belvedere.12/20/08 | Charles Zamorano, viciousreasoning@hotmail.com |
WANTED:I'm looking for the 2 piece style seatbelts with detachable shoulder belt for a 72 Duster.12/20/08 | Leanna Stupperich, mom.two_four@yahoo.com |
WANTED:I'm looking for a 1965 Dodge Dart with a 225 slant six exhaust.12/20/08 | Matt Bennett, ledsled74@aol.com |
WANTED:A stripe for the front air dam of my 1978 Plymouth Volare Super Coupe.12/20/08 | Ted Mitchell, tmitch21@csc.com |
WANTED:Looking for parts or info on locating fiberglass hood,trunk,& bumpers for a 1964 Dodge Dart Gt. Building a drag car called Dartzilla.12/20/08 | Bob Cullen, oldraceman@yahoo.com |
WANTED:Looking for inter. parts for 1966 Fury VIP.12/20/08 | Keith Miller, emtfire@hotmail.com |
WANTED:Parts for 1965 Plymouth Fury 2dr h/t. Looking for, left hand vent window, left hand rear window, Trunk tailight assembly. Would also be interested in parts car with or without title.12/20/08 | Brian Foster, enclosuresplus@suddenlink.net |
WANTED:63-65 Dart Convertable lower rear seat frame. Upholstery can be shot. Frame must be relatively rust free.12/20/08 | Don, chefdoncec@gmail.com |
WANTED:65 Dart 270 steering wheel in great shape. Trim not needed.12/20/08 | Don, chefdoncec@gmail.com |
WANTED:I am looking for the GT hood medallian for a 1963 Dodge dart GT, and trunk emblem that says Dodge Dart .12/20/08 | Don Cale, hardlydangerous@att.net |
WANTED:1971 challenger 383 motor to restore.12/20/08 | David Ryals, dryals@royalcommconst.com |
WANTED:I am looking for a set of 69 dodge dart bucket seats.12/20/08 | Cindy, babyboo_cin@hotmail.com |
WANTED:I need a 72-74 Cuda grille. I have the lower grille already. 859-307-0568.12/20/08 | Todd Peace, dart340@insightbb.com |
WANTED:Looking for the stripe/decal for a 1978 Plymouth Volare Super Coupe, Front Air Dam. Not the whole stripe set.12/20/08 | Ted Mitchell, tmitch21@csc.com |
WANTED:Need right side tail lightt lense for 1966 Plymouth Sports Fury.12/20/08 | Sidney Derrick, derricksidney@hotmail.com |
WANTED:I am looking for a rear passanger quarter panel for a 1966 Barracuda.12/20/08 | Patrick, sogrady@cfl.rr.com |
WANTED:1961-1962 Chrysler New Yorker Town & Country 9 pass. wagon wanted.12/20/08 | Tom, thl0184@comcast.net |
WANTED:looking for parts for dodge swinger... ( engine, transmission, rear quarters).12/20/08 | Kyle, chopperkid_7@hotmail.com |
WANTED:Looking for either vent window frames,right and left or just vent window adjusters for a 1970 Dart 340 swinger,this is all I neen to finish car please call 812-423-4120.12/20/08 | Eddie Robinson, dodgeman2004@hotmail.com |
WANTED:Wanted: 1967 Dodge Polara 500 convertible hood grille trim; 4" round "500" medallion for rear fender; radio antenna; electric window motors.12/20/08 | Glenn Gordon, n7epk@mail.com |
WANTED:69 Charger woodgrain 8 track radio face plate and end caps ac delete, also have 68 Charger hood release mecanism and latch thanx.12/20/08 | Bob, wendy.hen@shaw.ca |
WANTED:Looking for a grill for a 65 Sport Fury.12/20/08 | Katherine Sterrett, imkatt2@yahoo.com |
WANTED:Looking for a supercharger for a 1974 Dodge Charger or a blower motor! .12/20/08 | Timothy Fowler, timothy1992_fowler@yahoo.com |
WANTED:1970 Barracuda woodgrain whel in nice shape,rear bumper brackets,am radio playing+bezel,heater controls+bezel for nonAC,rally dash car .12/20/08 | Charlie, dualghia@hotmail.com |
WANTED:1962 Valiant for parts .12/20/08 | Dewayne, dkonz@goldrush.com |
WANTED:66 belvedere front bumper in good condition.parma ohio area have other 67 satalite parts for sale or trade. 12/20/08 | Bascom Allen, allenbascom@att.net |
WANTED:1964 Plymouth Sport Fury Passenger Side A-ARM.Maybe 62 to 64 B-Body A-Arms will fit. 12/20/08 | Shawn, svucenic2@aol.com |
WANTED:1968 Plymouth Fury III convertible instrument cluster.12/31/08 | Randy Frey, randyfrey51@hotmail.com |
WANTED:71 Doge Dart swinger light bezels.3/1/09 | David, dpimy8@yahoo.com |
WANTED:Want door rubber stops for 1962 Chrysler Newport Coupe. Ball joints Moog MOK772 & MOK719 or Spicer equiv. Ship to Australia.3/1/09 | Kevin Unger, ausbiz@activ8.net.au |
WANTED:front bumper 1966 Belvedere in good condition.have 67 Satalite parts 4 -sale parma Ohio.3/1/09 | Bascom Allen, allenbascom@att.net |
WANTED:I need a lot of little interior pieces that are in good shape for a 1965 Plymouth Fury III. Stuff like window cranks, chrome trim, mirror, clock, dash inserts(radio and heater control cover piece), ect. any info will help. Thanks!3/1/09 | Joel Langdon, photo_phix@mail.com |
WANTED:I'm looking for a driver's side windows for a '68 Valiant.3/1/09 | Larry, larrythethird@yahoo.com |
WANTED:I have a 1974 Plymouth Roadrunner. I need outside door handles. No junk please.3/1/09 | Don, Elzmengo@aol.com |
WANTED:1974 Dodge Challenger parts, interior and body metal.3/1/09 | Kevin, kcoudenys@hotmail.com |
WANTED:71-72 air grabber set up for sale, includes hood bubble, scoop door, underhood air box, flapper door, hinge, stainless mounting studs, all new from Stinger Fiberglass, and also includes a used rubber air cleaner to box seal, and a factory steel air cleaner, correct for 70-72 for use with this set up. I have a flat hood to attach all this to, if you want to pick it up, but I will not ship the hood. $850 for all the above, hood is free if you pick it up with this sale.3/1/09 | Dave Fetty, Buckneccid@Yahoo.com |
WANTED:looking for some heads for a 340 block .3/1/09 | Joe, j3latwork@yahoo.com |
WANTED:I am looking for a 4bbl poly engine intake for a 1966 Dodge Charger. Cast #1619826 or aluminum made by weiand #7503 either will work.3/1/09 | Howard Giddings, giddings01@cox.net |
WANTED:I am looking for a 70-71 mopar 340 small block that will fit in my 71 duster!! possibly with a 727 torqueflite tranny.3/1/09 | Andrew K, rand_waxtrax@yahoo.com |
WANTED:rear floor pans for a 1964 Plymouth Valiant 109 inch wheel base.3/1/09 | Cecil, Cregger2000@aol.com |
WANTED:Wheel molding for a 1967 Dodge Polara 500 all 4 of them 1 815 530 5908.3/1/09 | Jeff, jettinjj@AOL.COM |
WANTED:Full set of good quality P L Y M O U T H letters for the trunk lid of a 1964 Plymouth Savoy.3/1/09 | Carl Weisinger, cedward@aol.com |
WANTED:fender flares for 77 Volare Roadrunner.3/1/09 | Doug Wheeler, douglasmwheeler@bellsouth.net |
WANTED:Front and rear chrome bumpers for 1971 Dodge D-100 "Dude" pickup restoration, p/n 2909775 and 2909825. Will consider painted p/n 2909773 and 2909823. Other parts wanted for '61-'71 Dodge D/W (2x4 and 4x4) pickups too.3/1/09 | Walt McIntosh, wmac@usadig.com |
WANTED:4 dog dish hubcaps for 66-67 Dodge Coronet, also good front and rear bumpers.3/1/09 | Harley Koopman, photoghk@ameritech.net |
WANTED:For 1964 Plymouth Savoy. Stainless chrome strip that runs horizontal across rear of the deck lid..3/1/09 | Carl, cedward@aol.com |
WANTED:Transmission crossmember for 1967 Dodge Charger 727.3/1/09 | Jared Paulino, j_paulino2001@yahoo.com |
WANTED:I am trying to find 76 Volare' 2door parts mostly interested in front frame rails and floor pans.3/1/09 | Kevin Gaedig, kevingaedig@yahoo.com |
WANTED:71-74 Rallye Charger tailights, must be in excellent condition, hardly if no cracks, missing parts. Must be a plug and paly set up.3/1/09 | Jared Roberts, robertsfam@satrband.net |
WANTED:front & rear bumpers for a 1963 Plymouth Savoy.3/1/09 | Elaine, Princesswooba@yahoo.com |
WANTED:Want door rubber stops for 1962 Chrysler Newport Coupe. Ball joints Moog MOK772 & MOK719 or Spicer equiv. Ship to Australia.3/25/09 | Kevin Unger, ausbiz@activ8.net.au |
WANTED:Original 1970 AAR CUDA fiberglas hood.3/25/09 | Stan Raby, rabys@cox.net |
WANTED:I need a k member for a 73 318 Dodge Charger.3/25/09 | Bill Schmidt, softailbill05@msn.com |
WANTED:Non rally dash tach. and seat belt guides for 74 Cuda and solid antenna complete.3/25/09 | Don Stilling, Billytin25@hotmail.com |
WANTED:I am looking for fender emblems that say "Signet 200".3/25/09 | Al G., mcgiveral@hotmail.com |
WANTED:1960 Plymouth Fury,a radio antenna,a right front door sill,afront swivel seat and a 45 rca record player.3/25/09 | Jim Spreter, jhs06@charter.net |
WANTED:331 hemi four barrel cast iron intake.8/2/09 | Allen Zidon, allenz@polarcomm.com |
WANTED:Rear window glass for 1957 Ply Savoy sedan, body code P30-2. Also interested in a decnt left front fender,headlamp bezel/trim. not expecting perfect, just decent.8/2/09 | Larry, tincancustoms@yahoo.com |
WANTED:Tail Light and Backup Lenses for 1957, 1958 or 1959 Chrysler Town & Country Station Wagon.8/2/09 | John, john@emops.com |
WANTED:69 Plymouth fury III Convertible outside emblems.8/2/09 | Patrick Montgomery, countryp@yahoo.com |
WANTED: 1967 Dodge Polara 500 - I need the power window control panel (driver/LH door).8/2/09 | Glenn Gordon, N7EPK@mail.com |
WANTED: Looking for good quality fenders for a 1974 Dodge Challenger.8/2/09 | Kevin, sogh@live.ca |
WANTED:Looking for body parts or any parts for a 1962 Valiant station wagon .8/2/09 | William, dummiesforu2@aol.com |
WANTED:1965 Dodge Dart 273 Charger engine. Must be complete.8/2/09 | Robert Johnson, rsj2269@yahoo.com |
WANTED:1963 Plymouth Valiant (wagon)tail light lenses! right side or both.8/2/09 | Chris Dyas, cdyas@sbgnet.com |
WANTED:71 Scamp/Dart rear valance. Must be straight and rust free..8/2/09 | John, jpeters@smud.org |
WANTED:Power window regulators,window channels and motors for quarter windows on 1965 Dodge Coronet 440 convertible.8/2/09 | Don Reynolds, reyn8459@bellsouth.net |
WANTED:Rt and LT rear fender ornament for a 1960 Dodge Polara. P/N 1964062/063 Looks like never used. Photos avail. Ask for price after you've seen the pics.8/2/09 | Mike D, daugul1950@yahoo.com |
WANTED:Drive shaft for a 1967 Doge Monaco.8/2/09 | Will, rpm6967@aol.com |
WANTED:Front split bench seat with arm rest for a duster, demon, swinger, dart, or valiant. This seat has the backs that look similiar to the buckets and does not have head rest. 940-521-1800.8/2/09 | Tim Moreland, karaokedjforever@yahoo.com |
WANTED:1964 Valiant V200 rear floor pans. Need to be in good condition.8/2/09 | Anita Czervenatis, a_czervenatis@hotmail.com |
WANTED:Third bow convertable 1969 Sport Fury,armrest drivers door kick pannels call 786-385-7364 .8/2/09 | danny rodriguez, locodan56@yahoo.com |
WANTED:I am looking for a working 340 for a '68 'Cuda.8/2/09 | Diggy Dave, bearassv@gmail.com |
WANTED:Looking for a set of headers or exhaust mainifolds for a 1965 poly 318,somewhere in Ontario please email.8/2/09 | Chris Child, chris_gonefishing@lie.ca |
WANTED:65 Fury III outer tail light trim (aluminum) that"s C-shaped and mounts on rear fenders also need clock for dash.8/2/09 | Murray Farr, yatzee@canoemail.com |
WANTED:A set of 15x7 Mopar cop wheels and dog dish caps in Dayton Ohio area.8/2/09 | Darryl, bigwoodemod4@yahoo.com |
WANTED:A 4 barrel intake for a 1964 poly 318 can be stock or after market also a 1956 or 1957 Desoto 330-345 engine parts: cam, and connecting rods.8/2/09 | Gary Shulaw, keller5_98@hotmail.com |
WANTED:Looking for a complete jack assembly for a 1971 Dodge Demon. 860.336.1116.8/2/09 | Bill, Wfowens@msn.com |
WANTED:New or used lf and rf fenders for a 1974 Ply Duster v8 car thanks.8/2/09 | Mark Harvey, masamiba@westco.net |
WANTED:Looking for an original radio for a 1963 Dodge Dart 270 that is in good working order.8/2/09 | Nick Bormann, borhore@netamumail.com |
WANTED:Rear glass for a 64 Dodge Polara.8/2/09 | Kelly Arnold, keltonm@earthlink.net |
WANTED:Need the lower door chrome for 1963 Polara 500. Premium paid.8/2/09 | Dusty Bradshaw, myothernickname@gmail.com |
WANTED:Looking for a rear valance for a 71 Plymouth 4-door sedan that goes under rear bumper also any other mis 71 Plym Satellite 4-door sedan parts 402-238-6163.8/2/09 | George, nwvet@cox.net |
WANTED:Looking for 2 Valiant Signet emblems for a 1965 Valiant.8/2/09 | Margaret Mashford, margaretmashford@rogers.com |
WANTED:78+ volare NOS trunk floor with NOS inner fenderwells.$500.00.Located in Quebec Canada.When E-Mailing remove the XX.8/2/09 | Terry Jenkin, xxeatonautobody@yahoo.ca |
WANTED:1970 NOS Hemicuda oil pan.8/2/09 | Mike Peede, vet1993@windstream.net |
WANTED:The letter H for the trunk on a 1964 C-RYSLER convertible.8/2/09 | Robert Wysznski, airborne173ohio@aol.com |
WANTED:Looking for 72 Satellite reaar quarters and a manual trans.8/2/09 | Chris, mlb695@aol.com |
WANTED:1967 Dodge Monaco letters for rear side panel, all i need is the 'M' and an 'A' and willing to post to uk, can do paypal.8/2/09 | Toby Hall, toby@bitswap.com |
WANTED:New or very good used 1966 Belvedere/Satellite rear bumper.8/2/09 | M.Brown, mopr69383@aol.com |
WANTED:DODGE (trunk) emblem for my 72 Dodge Dart Swinger.2/20/10 | Chris, spez00@aol.com |
WANTED:1971 Plymouth GTX. Car must be a factory original 4 speed car. No automatics no clones. Solid roller or unrestored car. Please let me know.2/20/10 | Pete, gtx71fanatic@yahoo.com |
WANTED:Right front fender and front bumper for 1965 Dodge Coronet 440 .2/20/10 | Kelly Yongue, kelly.g.yongue@gmail.com |
WANTED:Looking for driver side window for a 1964 Dodge D-500 medium duty truck.2/20/10 | Mike, twomoosecamp@centurytel.net |
WANTED:Wanted: I am looking for a hood release cable for my 74 Dodge Charger..2/20/10 | Gerry, coors469@rochester.rr.com |
WANTED:1933 Plymouth PD coupe trunklid and window garnish moulds.2/20/10 | Rob Thompson, info@hemi.com.au |
WANTED:Looking for a Challenger or Cuda 1970 to 1974 . 15K to 25k must be V8 . please emails pictures .2/20/10 | Peter, pjcljc@hotmail.com |
WANTED:Wanted polished lower rockers for 1966 Dodge Charger. .2/20/10 | Henry Durbin, henr9258@sbcglobal.net |
WANTED:New or used rh lear fender Valiant Signet 2dr ht.2/20/10 | Tore Nilsson, dodge@sydnet.net |
WANTED:Rear valance for Valiant 1963 Must be straight and rust free.2/20/10 | Tore Nilsson, dodge@sydnet.net |
WANTED:Oil pan for 1969 Dart GTS 383 4 spd car also nos inner fenders for same car.2/20/10 | Bob Baillargeon, bdbaillargeon@hotmail.com |
WANTED:I need a pair of door emblems for a 1968 Road Runner. 903-570-1924.2/20/10 | Eddie Reagan, gtofarm1965@yahoo.com |
WANTED:Looking For Rear Quarters Both Sides 1967 Dodge Polara.2/20/10 | Larry, followme80@ol.com |
WANTED:14" 1966 Ply. Barracuda Formula S Mag type hubcap. Need 1 but may consider a set of 4. Please send pic and price inc. shipping to 08062 zip code.2/20/10 | Roberto, pursuitison@live.com |
WANTED:R/T emblem for trunk of 1969 Coronet r/t.2/20/10 | Alan Evans, aevans132@yahoo.com |
WANTED:1970 B Body Rally Dash Glove Box door. Black Pebble grain.2/20/10 | Joel Huggins, jphuggins@msn.com |
WANTED:I need 1965 Plymouth fury 3 bumpers and headliner.2/20/10 | Jeff, jsgreen7771@msn.com |
WANTED:Working/operational fuel gauge for a 1966/1967 Dodge Charger.2/20/10 | Bill Woosley, billwoosley@msn.com |
WANTED:Need driver's side rocker moulding for a 63 Ply. Valiant Signet 200.2/20/10 | Dave Cook, odad37@yahoo.com |
WANTED:Need a rear glass for a 66 dodge polara 2 door hardtop.2/20/10 | Jonathan Fisher, jonathan.s.fisher1@us.army.mil |
WANTED:need trim piece that goes from top of front fender down to end of front fender. 1966 chrysler new yorker sedan. vih #ch42j63169346.2/20/10 | Bill, psstoneburner@netzero.com |
WANTED:Looking for aMmoroso oil pan for a 360 Ddodge.center sump for a 1969 Dart.2/20/10 | Tony, hanlon@shaw.ca |
WANTED:Looking for a power buldge hood to fit my 74 Charger I live in Canada but willing to pick up.2/20/10 | Dwight, wdturko@mts.net |
WANTED:Need perfect dash 1966 Chrysler New Yorker. any color. Need instructions how to remove dash from car.2/20/10 | Bill, psstoneburner@netzero.com |
WANTED:Complete set of front seat belts for 73 Dart sport that has detachable shoulder belt.2/20/10 | Dan Rodman, drgr2@msn.com |
WANTED:Starter for 1970 AAR Cuda #2875560 build date 4-3-70, need correct date code.2/20/10 | James, jpslks@mindspring.com |
WANTED:383 b motor w/ 3speed manual tranny.2/20/10 | Joe Kramer, jkramer@eufaula.rr.com |
WANTED:Hood,grille,trunk lid for 1972 Barracuda/Cuda, also tailgate for Dodge stepside (red express/warlock).2/20/10 | Ken Bugg, ken_bugg@hotmail.com |
WANTED:I am looking for a carburetor for a 1968 Plymouth Valiant or Dodge Dart (Holly Model 1920) or Carter model or other equivalent.2/20/10 | Barbara Carter, lakelookout@charter.net |
WANTED:64 Polara 500 Rear Quarters, consider complete car.2/20/10 | Grant, dodgecity@clear.net.nz |
WANTED:I am looking for a 1965 Plymouth Belvedere I heater delete plate... does anyone know if these are being re-popped.2/20/10 | Brian, brian.linn@yahoo.com |
WANTED:Looking for two 1959 Chrysler Imperial Tail-lights.2/20/10 | Frank Azevedo, ford240@frontier.com |
WANTED:Early hemi parts Dodge Desoto or Chrysler looking mostly for dodge stuff 207/627/3403.2/20/10 | Stephen Gagne, stephengagne354@yahoo.com |
WANTED:Rocker panel trim for a 66 Coronet 500.Must be in good condition.2/20/10 | Kim, yamahogg1@hotmail.com |
WANTED:1971 Plym Fury Suburbon stationwagon.2/20/10 | Rockafain, rockafain@yahoo.ca |
WANTED:Aloha from Holland I hope you can help me I am looking for my Dodge Dart 1967 4drs model 270 the front rubber or seal for front windshield I cant find it over here hope you can help me that is the only thing I need then car is done thank you aloha jp vdtak.2/20/10 | Jean-paul , jeanvandertak@hotmail.com |
WANTED:1966-67 Belvedere Wagon, Interior parts. Plastic covers over rear wheel wells, if cracked OK as long as all is there.2/20/10 | Bob Ward, ncl50@verizon.net |
WANTED:1972-1990 Dodge 3/4 pickup truck. Must be a 4X4. the condition of the truck doesn't matter. 307-248-2217.2/20/10 | Matt Cazier, cazier_matt@hotmail.com |
WANTED:Looking for left and right rear power window regulators for a 1964 or 1965 Plymouth Belvedere two door hard top. Any 1964 or 1965 Dodge and Plymouth B-body two door hard top will work. email or call 701-258-7784.2/20/10 | Bill, williamwald@yahoo.com |
WANTED:Looking for a Barracuda Gran Coupe headliner backboard.2/20/10 | Bobby Roberts, bobebob@aol.com |
WANTED:crankshaft for 1960 De Soto Diplomat (export market) - 318 poly motor - require 1957-61 six bolt crank.8/12/10 | Jan, jan.omnet@rocketmail.com |
WANTED:2 sedan post 63-65 doors. 8 3/4 489 10spline gear set 3:23---4:10 will work. Orangeville ..Ont.8/12/10 | Dave, rpm.ltd@sympatico.ca |
WANTED:Rear (left) Driver's side tail light lens for 1963 Plymouth Valiant Station Wagon..8/12/10 | Chad Fuller, fulleys@cox.net |
WANTED:Door hinge set for 83 Cordoba 318 2 door..either NOS or rebuilt Drivers side door hinges ..or..a rebuild-able set.8/12/10 | Dave Fragale, DWFComm@aol.com |
WANTED:I am still searching for gauges for a 1966 Plymouth Fury iii I have had responses in the past, however got bad, was not able. but still looking..8/12/10 | Frank Feemster, frankf@embarqmail.com |
WANTED:1978 Plymouth Volare one piece air dam, part #4022 599.8/12/10 | Bob, parts@chuccis.com |
WANTED:Rear tail light(lens) for chrysler 300 1966.8/12/10 | Gilles Patry, patgille1@yahoo.com |
WANTED:1969 plymouth gtx 8-trak woodgrain radio faceplate.8/12/10 | A.J., gtxjohns@gmail.com |
WANTED:1963 Dodge Polara parts...Mostly need interior,weather strip,headliner..Drivers side fender..8/12/10 | Bryan, Fryracing22@yahoo.com |
WANTED:1963 Dodge Polara parts...Mostly need interior,weather strip,headliner..Drivers side fender..8/12/10 | Bryan, Fryracing22@yahoo.com |
|
This section is for people trying to sell parts | |
DESCRIPTION |
CONTACT |
FOR SALE:1970 Hemi Cuda garage kept 4 speed $240,000.00 Many pictures available but please be serious.1/4/08
| Nick Hammer, demonick@cox.net |
FOR SALE:1961 Dodge Dart 440 Station Wagon Window Glass except windshield (765)488-0560.2/1/08 | Tom Cones, tommythetoolman@insightbb.com |
FOR SALE:68 valiant parts windshield,rearwindow,firewall,rims13inch,dogdish hubcaps,trunklid,front and rear bumpers,225 slant 6,trans,radio delete dash,sterring colum . 2/1/08 | Steve, wiggly@rogers.com |
FOR SALE:1981 Cordoba ls 318 auto buckets console, dual exhaust w/challenger tips $2000.00. 2/1/08 | Ron, mrromanchuk@telus.net |
FOR SALE:1975 Cordoba deck lid rustfree excellent cond. $275.00. 2/1/08 | Ron, mrromanchuk@telus.net |
FOR SALE:'62 Chrysler Windsor, Rare 383, Push button auto, ALL ORIGINAL 51,110 miles! Runs well and drives smooth. MUST SELL, located Red Deer AB.. 2/21/08 | Brett Anderson, brettamb@telus.ca |
FOR SALE:Have foot pump for windshield squirters with hoses in excellent shape if needed fits e-body or a-body 70-74 cars.2/21/08 | Gary Jordan Sr, gjordansr@yahoo.com |
FOR SALE:Flat hood & deck lid for 70-74 Challangers& upper and lower A-arms for anti-sway bar Have bars for E-body factory originals-Factory e-body dash cap cracked but lots of parts-c-body magnum left side exhaust manifold-original 273 formula S exhaust manifolds A-bodu Cuda& Dart-Early Hemi Heads 331-354-392-1956 354-280 hp Engine runs 41k miles-2843906 heads 3 sets-Cams Mild to wild A-B-RB motors & lots more Restorer retiring if you got money have it all.2/21/08 | Gary Jordan Sr, gjordansr@yahoo.com |
FOR SALE:(2) 340 engines; 1968 & 1970 : stored 35 years. Upon tear-down and gauging they are both std bore (original lo mileage) Both have X Heads and inc intake to oil pan (long block)less T/chain and Pistons. $1800 each.2/21/08 | Larry, thestitcherllh2@aol.com |
FOR SALE:1974 360HP Cuda engine block w/mains .030 $300.2/21/08 | Larry, thestitcherllh2@aol.com |
FOR SALE:(2)1969 & (1)1970 383HP blocks w/mains & crank. $450 each.2/21/08 | Larry, thestitcherllh2@aol.com |
FOR SALE:Performance Suspension Technology complete front end rebuild kit for Plymouth Valiant 1962-66,68-76 (1967 excluded). May fit other Mopar models. Kit is new. $280.00 obo. Located in Bergen County, NJ.3/1/08 | Dylan, professorstimpson@yahoo.com |
FOR SALE:1968 Dodge Dart gts hood $650, 2 360's 1970 model 5-4-70 casting numbers complete 360 motor 1971 model 6-11-71 casting numbers complete 360 motor $1000.00 each obo 864-986-9116.3/8/08 | Jim Kelley, blue2227@bellsouth.net |
FOR SALE:66 plymouth sport Fury II have front and rear bummbers, org.not reproduction, never ever been used, been redipped.$200.00each.4/7/08 | Davin Vela, davinvela@yahoo.com |
FOR SALE:I have a 1957 Imperial 392-345 horse Hemi engine Valve covers to pan,no intake-your choice of heads O-ringed or stock-have blower pistons also-Mickey or Arias not stock bore ,030-.060-xtra oil pans 200. ea-Moroso oil pump Hemi- Motor- 392 is 4000.00-My last one. this motor has been stored for 35 years and it is stock bore and needs to be built.Havent even disassembled yet STEEL engines cost more!!Have many MOPAR E-Body stuff on craigs/kc Missouri.4/7/08 | Gary Jordan, gjordansr@yahoo.com |
FOR SALE:74 Valiant Brougham 225. Org. owner, 126k,at,ac,ps,pb,am radio. very good cond. Runs great. New tires,battery. Brown, beige top. in NC. $2500. 828 322-1775.4/7/08 | Jerry, jerrypayseur@yahoo.com |
FOR SALE:I have 1970 Cuda big block that I am parting a 70 Cuda big block all kinds of parts elctical parts complete car wiring harnes .complete black interior, complete body less fenders ,hood all suspension all the glass chrome, doors, too many parts too list, . 828 322-1775.4/7/08 | Marv, jamil_zabian_12@hotmail.com |
FOR SALE:1974 Plymouth Valiant Brougham. Original owner. 126K. Very good condition. ac,at,ps,pb,brown w beige vinyl top. New tires,battery. Runs great. In NC. $2500. 828 322-1775 .4/7/08 | Jerry Payseur, jerrypayseur@yahoo.com |
FOR SALE:1969 Plymouth 440 GTX. Original parts and owner. In garage for many years. Picture available. $85,000. .5/22/08 | D Garcia, dmgarcia@verizon.net |
FOR SALE:66 67 Charger front and rear bumpers good for driver or rechrome.5/22/08 | Zaz, zaz@mail.com |
FOR SALE: 1969 Dodge Dart Flat hood.$100.00 | Don Wagner, donwagner1@hotmail.com |
FOR SALE:1970 Duster air conditioning. everything under the hood .this all worked great.I just dont use it cause of where I live is not that warm. I have pictures, get a hold of me and we will work out a price.5/22/08 | Cliff Wasnoska, zeebee1@comcast.net |
FOR SALE:1968and1969 coronet parts 69 is a 440 car.68 is a 383 car doors,glass,trim,fenders,1/4 panels,interior parts,suspenson parts ,k frames 2 many other parts to list.5/22/08 | Marv, jamil_zabian_12@hotmail.com |
FOR SALE: 70 Challenger rt parts hood ,rear end, leaf springs, 391 gears, J code heads, steering wheels, 2 fiberglass fenders and ext ends.5/22/08 | Marv, jamil_zabian_12@hotmail.com |
FOR SALE: mopar parts for sell ! visit website www.drmopar.com 500 car inventory central texas.5/22/08 | Glen Cox, atozmopar@aol.com |
FOR SALE:Ive got a 1973 Dodge D100 for sale. its in good condition but needs some work on the floor and a new paint job email me for pics.7/1/08 | Chris, yoyoudude1@bellsouth.net |
FOR SALE:I have a highrise Offenhauser-turbo thrust power port aluminum dual 4 barrel intake.(440 mopar set-up)new performance cam,lifters,push rods,double cc value springs,locks and caps,compcam spring lifters.all brought new in 1993,never been used any of it.all still in the orignal box.(440 parts).I am looking too trade all this for a old Dodge diesel truck with a good motor and tranny,body rough is fine as long as the motor and tranny is good.It has too be a Dodge diesel.you can e-mail me put in the subject box (intake)or call 1-270-531-3301 ask for Curt.8/8/08 | Curtis Nunn, cnmoparman@yahoo.com |
FOR SALE:69-72 340 complete except carb and dist stock bore still has some cross hatches in cyl J heads 2500 soutbend in area can get picts serious buyers only.8/8/08 | Ray Griffith, rgriffith@odleasing.com |
FOR SALE:1964 Plymouth Valiant Signet 200 Convertible.Rare 273V8,pushbutton auto.Restoration started,seats redone(black.Car in primer.original color,aqua metalic.Runs good,good tires.Last registered1973.Can email pics.Would like to get$5,000 or near offer.Tel.845-794-6124 anytime.8/8/08 | Luke Tursi, ltursi@hvc.rr.com |
FOR SALE:1972 Dodge Coronet - Have the entire grille and bezels. Also, alot of misc. parts for it.8/26/08 | Michelle, mmiched@aol.com |
FOR SALE:1955 Dodge Sierra Station Wagon. Two Tone blue.Needs restoration but is a good,solid complete&running car.Lever auto transmission V8 Some rust but mostly surface.Asking $2,850 or close offer.Can email pics.Call anytime for more info. Tel 845-794-6124 Luke.8/26/08 | Luke Tursi, ltursi@hvc.rr.com |
FOR SALE:Mopar engines, transmissions and related components. 318, 360, 383, 440. $5 and up. 77 440 motorhome torqueflite w/24K original miles. $300.10/16/08 | Phil Walker, processinsight@provide.net |
FOR SALE:Stripping a 1968 Plymouth Fury III 4 dr. Getting rid of all trim, inside and out, wheel covers, etc. making into demolition derby car.10/16/08 | Billie, Sue, billiesue2@msn.com |
FOR SALE:"astradome" instrument panel from a 1963 Chrysler 300. great condition, with misc. trim.10/16/08 | Billie, Sue, billiesue2@msn.com |
FOR SALE:1974 Plymouth Roadrunner, this baby was ordered from the factory by my husband. It has a solid black body (omitted the factory stripe). It has a 440 motor, the interior is excellent. The body seems to be all original, minor rust. The tires are flat, but it still has orig rims. I can send pics, all I know is, when I sit behind the wheel, I want to put air in the tires and RIDE!!! The car was garaged for 10 years, now it is sitting in my driveway, with a cover. This baby needs someone who has a garage for her. We are located in upstate NY and I previously posted our baby for $15K, now I will accept $13K plus shipping or pickup. She is a beauty and needs the right attention from the right person.12/20/08 | Mamie, mamiesoroka@aol.com |
FOR SALE:Many Mopar original 70-74 Dodge parts, for Cuda's,Challengers,Swingers,Darts and more. If there is a part your looking for in these years or models and if I don't have it in stock, chances are I can find it.12/20/08 | Wayne, moparlane@gmail.com |
FOR SALE:1965 Ply.Belv.1 front clip good shape,trunk lid,interior parts.Call 919-920-8595 or email for prices or pics .12/20/08 | Kenny Washam, kwasham@whitestractor.com |
FOR SALE:Charger 72 SE to restore $1500.12/20/08 | David, ritO661@hotmail.com |
FOR SALE:1965 Dodge Dart wagon. 273-4 barrel,auto. Great condition. All stock. virgin car. Interior clean no problems. Car is origianl white, no rust! asking $1500. Make offer.12/20/08 | Danny Mazzella, dmazzella@fjmtruckcenter.com |
FOR SALE:74 Plymouth Scamp good engine only 95,000 miles, every thing works, needs body work-mostly rust. asking 2500 obo. 850-332-8921.3/1/09 | David Bickford, dbickf7339@students.pcci.edu |
FOR SALE:66 Satellite 440,727w/console, police rims, some rust in trunk at wheelwells, not run in two years. arlington, tx. 214-869-1760.3/1/09 | Chuck Harper, chuck.harper@usps.gov |
FOR SALE:1970 barracuda hood ,trunk lid,window regulators,heater box,glove box door,filler panel l + R doors complete with glass,instrument cluster ,grille.3/1/09 | Dave Ash, abelsnz@yahoo.com |
FOR SALE:One 1976 spirit of 76 D100 shortbox pu complete running needs total reno.3/1/09 | Bill, wakunltd2@yahoo.com |
FOR SALE:1968 Charger R/T J code body #'s matching w/ 2006 6.1 Hemi w/ cpu/wire harness. Click here for photos3/25/09 | Bill Kibodeaux, beve1@msn.com |
FOR SALE:Slant 6 Engine(1965) Complete in good condition with 38,000 miles. $200. 8/2/09 | Hubert, iceweasel@sympatico.ca |
FOR SALE:3-sp auto transmission (1965) from slant 6. Ball/trunnon type. $125.8/2/09 | Hubert, iceweasel@sympatico.ca |
FOR SALE:For sale. 392 Chrysler Hemi. Best parts used no expence spared. Everything new. Also comes with fresh 700R4 tranny. Tons of billet. Here's the link to pic's. http://s582.photobucket.com/albums/ss268/runner69/ Contact me with any questions. Price is $17,500.00.8/2/09
| Douglas Cunha, runner69@cox.net |
FOR SALE:1964 1/2 ply signet 200 convertible CLONE, front 64 back 65, everything new or rebuilt, drive home and show 273 v/8 push button auto, $6900.00 and 1966 barn yard fresh barracuda, 1 owner no's match, all there new tires 6 cy, rust under carriage body not to bad,all glass good shape, $1500.00 email or call for pic's 217 423-9842 ask for bob in il. good il. titles on both, make a deal for both!!8/30/09 | Bob Reynolds, rrcrreynolds@aol.com |
FOR SALE:4 sale 1964front and 1965 rear, plymouth signet200 convertible $9800.00 done nice, 273 v/8 pushbutton good il title drive home blue over white el top, new boot, brakes gas tank carpet,am radio tires hub caps and rings 217 423-9842 even have org build sheet.8/2/09 | Bob Reynolds, rrcrreynolds@aol.com |
FOR SALE:I have for sale a steering wheel hub from a 1963 Plymouth Belvedere. Hub is in very good condition. $45.00.8/2/09 | Jeff Bell, thoris_bell@comcast.net |
FOR SALE:1957 CE imperial hemi engine, needs rebuilt, will be first time, has everything except intake,has CHRYSLER FIRE POWER valve covers signed by Don Garlits himself, at this priec you get choice of heads and MOROSO oil pumps and Blower pistons 4000.00.8/2/09 | Gary Jordan sr, gjordansr@yahoo.com |
FOR SALE:1969 Chrysler newport 383 4dr sedan runs drives excellent condition $2,500, loc Ore.8/2/09 | Steve, raidersnowmobil76@msn.com |
FOR SALE:1970 Dodge Challenger convrtble 340 727 trans maching number int in grate shape cars in good cont needs some work you can call me at 647-998-4753.8/2/09 | Frank, frankstanley@ymail.com |
FOR SALE:I have a complete set of 14 inch wire wheel covers with anti-theft locks. New still in box Purchased in 1984 approximately.8/2/09 | Nancy Wagner, nwagner2007@yahoo.com |
FOR SALE:I have a 1978 Ply Volare need to sell my son and i was going to restore it but lost my job now need to sell it wanting a $ 1,000 for it. needs work runs and drives but needs work, elkhart indiana.8/2/09 | Michael Briggs, MBrwolflzer@hotmail.com |
FOR SALE:71 340 motor out of a dodge challanger. 20,000 miles on rebuild. complete except for carb and starter. runs strong! 58lbs. oil pressure after warmed up at 2000 rpm.1800.00$ b.o. 507-381-2609..8/2/09 | Jed Depuydt, jed.depuydt@gmail.com |
FOR SALE:1974-1975 Chrysler New Yorker Imperial LeBaron Rear disc brake set up COMPLETE every last bolt, nut, bracket and spring! Fits 9 1/4 factory rear end. Another complete set modified to fit Dana 60 and 8 3/4 Call 814-450-1387 Will separate.2/2/10 | Super Bee Dean, 71superbee@roadrunner.com |
FOR SALE:i have a new chrystler 383 crate engine for sale still on crate never installed paid $1300.oo will sale for $800 call 1-760-2367-1560 dont use email.2/2/10 | Steve Gomez, 1-760-2367-1560 |
FOR SALE:1969 dodge dart custom 2dr factory 273 v8 automatic power steering original owner car runs and drives pictures upon request 1-707-246-2041 cali car.2/2/10 | Kevin Diggs, kevoson@comcast.net |
FOR SALE:1970 340 block engine Professionaly built with 2- demon 925 carbs, 671 blower. Puts out 750 Horse. Can see at (cars-on-line) 1971 green Demon in PA. Yes it is currently in this car. $15,000.00 FIRM.Engine only.2/20/10 | Jeff Fiester, jefffiester@yahoo.com |
FOR SALE:I have both front and rear fenders, running boards, grill shell, and hood assembly for a 1936,67,38 Dodge / Plymouth truck 1500.00 for all. Call me at 228-380-0069.2/20/10 | Ron Mitchell, rdcamit@cableone.net |
FOR SALE:66-69 Hemi chrome aircleaner complete, base,lid and element original piece in nice cond.$1000 or trade for 71 Cuda black non ac dash pad in mint cond.2/20/10 | Steve, crashklein@aol.com |
FOR SALE:1969 Dodge Dart GT 318 restored with over $13,000 new parts, new custom interior etc..email for full details. $9,500.2/20/10 | Michael S., mikeandshannon2009@yahoo.com |
FOR SALE:4 original 1957 plymouth 14" cone wheel covers in great shape $100.00.2/20/10 | Jim Reynolds, jimjoan@goes.com |
FOR SALE:1968 PLYMOUTH ROADRUNNER, 383,4 speed, color red, excellent condition, will provide pictures to any one who is interested asking 16,000 OBO call 505-281-2403 .2/20/10 | JR, ejalderete@yahoo.com |
FOR SALE:Mopar parts for sale 9-5 mon-fri/sat9-3am ask for Vinny 207/539/4888 tell him Stephen Gagne sent you! .2/20/10 | Stephen, stephengagne354@yahoo.com |
FOR SALE:1974 Plymouth Valiant 4-door parts - All four doors w/ glass, decklid, rear bumper and filler "rubber", taillights w/ harness, rear quarter extensions, front highback split bench w/ armrest, rear bench, uncut dash shell, misc. interior parts, contact with needs, 217-759-9922, .8/12/10 | Cory Dines, cory-kristy@skywayusa.net |
FOR SALE:1962 plymouth savoy 4-door......all 4 door's with Good Glass and Hardware meaning handles, cranks, locks etc.all for 400.00 must be picked-up. .8/12/10 | Jerry Lockhart, lockhart@yhti.net |
FOR SALE:1974 Roadrunner please call for information on it if interested asking 10,000 has to be put together. 708 227 0167 .8/12/10 | Tom t, moparmuscleguy@comcast.net |
FOR SALE:76 to 80 Dodge Aspen or Plymouth Volare center console with shifter for auto trans $100 OBO 208-250-1201 .8/12/10 | Brian Hefner, brianehefner@clear.net |
FOR SALE:holly 2 barrel carb.Id # r6690a. I had mopars in the 70's.found in my garage in a sealed up box after 35 years! .8/12/10 | Larry Provance, lprovance@neo.rr.com |